GIGABYTE UD5 RAID DRIVER

GIGABYTE UD5 RAID DRIVER

admin February 10, 2020

Only after numerous restarts, shutdowns, and complete power-off restarts, including the dreaded no post blank screen everything came up just before I was getting ready to reset CMOS. But focus your search on the JMB first. Thanks for the replies. Several more reboots did nothing to help. You could also try AHCI since the driver is installed. Got pics of that?

Uploader: Karg
Date Added: 8 April 2006
File Size: 32.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5774
Price: Free* [*Free Regsitration Required]

Copyright c Tweak Town Pty Ltd. The manual is a bit confusing about it. What are your full system spec’s?

Got pics of that? Secure erased both via mobo RAID utility and then rebuilt array. I don’t think I’ve got any issues with that setting — it’s the next one that bothers me.

I assumed you are using XP bit. Proceed to u5 into RAID utility and notice that one or both of the drives have disappeared no longer being reported.

Must have tired from doing 20″ of snow today. November 04, The jmicron is a 32 bit driver, you can also get the 64 bit on their website.

After unplugging the HDD that I had my temporary gigbyte of Windows on, which was plugged into the top Marvell SATA port along with a second HDD in the bottom port the board would spin up the fans but no post beep, no video or nothing.

  COMPAQ C700 MODEM DRIVER

Copyright c Tweak Town Pty Ltd.

Gigabyte GA-990FXA-UD5 – 1.0 – motherboard – ATX – Socket AM3+ – AMD 990FX

Reboot and noticed that when RAID firmware is reporting the array offline. It won’t solve the problem but it will make you feel better. I know, however, that if I add a drive to either channel, it will not show up in the BIOS – which seems wrong to me.

I did encounter some weirdness with this board after finally getting the array working. I didn’t know it would go above 5. November 07, Several more reboots did nothing to help. Hi there, pleased you seem to have sorted the problem. I understand where you’re coming from but, if you have any important information stored on your HDD’s it would be better to swap them over now rather than later on when it might be too late. According to the manual, using the Standard mode allows it to work as a port muiltiplier and you can supposedly just hook up 4 SATA drives and run them independently.

GA-990FXA-UD5 RAID Setup Problems

Tags for this Thread exud5raidsmartbackup. For thew kind of money I put into this system, I’m not happy with the Rating, only 5. Look under integrated peripherals. Results 1 to 6 of 6. Hello, Need some help, I just build a new system with Windows 7 64bit. Windows fails to see the RAID volume.

  B22W 5 ECO DRIVER

Raid 0 Setup with GA-X58A-UD5

Regular BIOS config screen also does not show drive s. Only after numerous restarts, shutdowns, and complete power-off restarts, including the dreaded no post blank screen everything came up just before I was getting ready to reset CMOS. Trying to setup a different pair of drives non ssd even in a RAID setup. So here are the symptoms that I am encountering. Page 1 of 2 1 2 Last Jump to page: Results 1 to 10 of I do feel that this Marvell SATA controller is a negative aspect of this motherboard and I know from reading of other user’s experiences across the platforms that it is not highly rated.

Not sure how RAID would perform though, if you test please let us know.